Radio control Super Traction Rear Lower Suspension Arm 42 mm 2 Pieces [TP-514]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product explanation ■ It is a high-performance suspension arm with Delrin milling.
It can be used for models with inner suspension pin φ 3 mm and アウダーサスピン φ 2 mm such as RDX and YD-2 series (RD1.0, SD1.0, SD2.0).
The inner suspension pin can be supported by bearings.
* Bearing (630) with outer diameter 6 mm x inner diameter 3 mm x thick 2.5 mm can be used. Please note that the shaft may not pass through the bearing depending on the combination of the bearing and suspension pin. If it does not pass through, please shave the suspension pin thinly with sandpaper.
Both sides can be used reversibly with the same shape.
<>
Super Traction Rear Lower Suspension Arm x 2
M2 Sticking Screw x 4 (アウダーサスピン fixing)
M3 (inner diameter 3.2 mm) x thick 2.5m Color x 4
* Depending on the type of installation, there may be a gap between the suspension mount and the suspension arm. Adjust it with a commercially available M3 spacer if necessary.