Radio control Rear Toe Control System for YD-2S [Y2-RTCA]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ The new rear toe control set that dramatically improves the running performance of the YD-2S Series is now available!
By installing a kingpin shaft on the rear hub carrier and connecting the linkage for the toe control, it is possible to change the toe angle according to the suspension operation.
The constituent parts are made with aluminum lower caster block, aluminum hub carrier and graphite arm plate for lightweight and high rigidity.
The damper is also attached to the front side of the suspension arm, so the weight of the rear overhang is reduced and it looks lacy.
Various settings are possible depending on the angle of the rod corresponding to the operation of the suspension. For example, if it is set to bump-in which changes to the toe-in when the suspension sinks, it is possible to set various settings such as smooth turning performance at the corner entrance and easy acceleration by raising the rear grip when the throttle is turned on at the corner exit, or by setting it to bump-out,
from a stable straight forward to a dynamic start and produce a drift with a flying distance.
In addition, the toe angle adjustment at standstill can be easily changed without any steps, so the range of settings greatly expands.